Explosion Isolation Valve

Redex Valve

Redex Valve safeguards industrial systems from the spread of explosions. It is a passive explosion protection valve with a history of proven operational reliability. The REDEX® ESI serves as an ef...

Explosion Isolation Valve

Ventex Valve

Ventex Valve protects industrial system against the spread of explosions. It is a passive explosion protection valve with years of proven operational reliability, the VENTEX® ESI acts as an effect...

Rupture Disc

Graphite Rupture Discs

Our graphite rupture discs which are non-reclosing pressure relief safety devices. Material of construction of Rupture Disc of SVI Carbon is impervious graphite, which has excellent corrosion resistan...

Rupture Disc

FAD-VS-H- Flat Atmospheric Discs–Vacuum Support with Holder

Ventil FAD-VS-H model Rupture disc is specially designed for protection against overpressure and vacuum for both. ...

Rupture Disc

FAD Flat Atmospheric Disc

Flat atmospheric Disc: FAD is used for protection against overpressure, e.g. in storage vessels, tanks, pipeline and low-pressure systems. Also suitable as a secondary safety device alongside safety v...

Rupture Disc

CDR- Composite Dome Rupture Disc

Composite Dome -Forward Acting Rupture disc design, the loads are applied to the concave side of the rupture disk, stretching the dome until the tensile forces exceed the ultimate tensile stress of th...

Rupture Disc

SRD-SF

Ventil SRD-SF is Non-fragmenting Reverse Acting Rupture disc with or without pre-attached support ring for Gas Insulated Switchgear and Transformer applications....

Rupture Disc

SSR- Sanitary Scored Reverse

SSR is reverse acting, scored rupture discs for use in sanitary applications. The discs are designed for higher performance and operating parameters. The discs are suitable for use in Liquid and gas s...

Rupture Disc

SRDH- Scored Reverse Acting Rupture disc with Holder

Scored Reverse Acting Rupture disc functions when the pressure creates an instability in the dome, resulting in reversal, or buckling, of the dome. Typically, have longer cycle life than forward-actin...

Emergency Vent

Emergency Vent

When fire occurs near the storage tank which is having flammable liquid the heat is transmitted through the tank walls causing to vaporize more quickly this condition create a relatively high pressure...

Flexible Connection

Flexible Connections

Flexible Connection absorb the continuing movement experienced in piping systems because of varying ambient temperatures, differences in temperature of materials being handled, and differences in comp...

Explosion Vent

SDV- Sanitary Dome Vent

Single layer metal sections are slotted with intermittent uncut sections that control the burst pressure and vent opening. domed panel, designed to protect plants with a vacuum and pulsating processes...

Explosion Vent

CFV- Composite Explosion Vent

Composite vents are typically made of a three-part sandwich construction of plastic film seal between two sheets of metal, usually stainless steel. The two metal sections are slotted with intermittent...

Flame Arrestor

In-line Flame Arrester

When flame arrester is installed between pipeline to prevent the propagation of Flame from the exposed side of unit to protected side by use of Crimped Ribbon Corrugated Matrix, is called as “In...

Flame Arrestor

End-of-line Flame Arrester

Flame arresters are classified according to their location with respect to the equipment they are protecting. When a flame arrester is located directly on a vessel/tank vent nozzle or on the end of a ...

Safety Relief Valve

Safety Relief Valve

Safety Relief valve are designed to open at a preset pressure and discharge fluid until pressure drops to acceptable levels. Safety Relief Valve is type of safety valve used to control or limit the pr...